Filter By:

  • Show More Brands
  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Parts

All-City Standard Track Cog
$22.00 - $24.00
- Chromoly steel with black oxide finish - 1.37" x 24tpi right hand thread - Requires a cog lockring (sold separately) - Compatible with 1/8-inch chains
Avid Disc Brake Pads (Elixir)
$24.00 - $30.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
Avid Front 180mm/Rear 160mm Post Bracket Hardware Kit
$24.00 - $58.00
Avid's Front 180mm/Rear 160mm Post Bracket Hardware Kithas everything you need to mount a front 180mm or a rear 160mm rotor (sold separately) to your bike.
Avid Disc Brake Pads (Code)
$26.00 - $34.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
Avid Hydraulic Line Kit
$32.00 - $45.00
Need a replacement line for your Avid hydraulic disc brakes? You're covered with Avid's Hydraulic Line Kit. It's got 2000mm of hose for front or rear application, and all the fittings to work with your brakes.
Blackspire C-4 Ring God Bash Guard
$40.46
- 3/8" thick Lexan for lightweight protection - Includes (4) 15mm male chainring bolts
Blackspire Snaggletooth Wide Profile Chainring
$56.00 - $80.00
- Wide tooth profiling prevents chain drop without a chainguide - Compatible with 9/10/11 speed chains, allowing a 1x setup on most drivetrains - Constructed in Canada from 7075 aluminum
Brooks Microfiber Bar Tape
$27.00
Brooks Microfiber Bar Tape is manufactured from a synthetic textile which has been treated with a polyurethane coating for maximum resistance against abrasion and moisture, providing excellent durability. Included are a pair of Brooks Rubber Bar End Plugs.
Campagnolo Chorus 11-Speed Chain
$84.99
For smooth shifting and a quiet drivetrain, pick up Campagnolo's Chorus 11-speed chain. It's unidirectional for unparalleled function and features lightweight hollow pins as well as an anti-friction treatment for shifting perfection. It also boasts excellent wear and flex resistance.
Campagnolo Record Hiddenset Headset (1 1/8-inch)
$110.00 - $185.00
Campagnolo's Record Hiddenset Headset neatly integrates with compatible frames for excellent control and an elegant look. It's comprised of steel, aluminum and carbon components for exceptional reliability and function.
Cane Creek Crown Race
$9.00 - $13.00
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Durable steel construction
Cane Creek Non-Aero Brake Lever Hoods
$10.82
• Replacement hoods for road brake levers with traditional, non-aero cable routing • Soft, tacky rubber for a sure grip • Available in black or brown
Cane Creek 110 IS42 Headset Top
$82.00
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 110 headsets. • Technical Description: IS42/28.6/H9/x • Top Type: IS- Integrated • Top Head Tube Inside Dia.: 42.1mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 9mm (Short), 15mm (Tall) • Top Bearing Type: Top-quality, sealed stainless steel bearings • Material: 7075 T Aluminum • Weight: 41.81g
Chris King Devolution Baseplate
$25.00
These baseplates are the foundation that keeps Chris King headsets turning with legendary smoothness. Manufactured from high-quality stainless steel or titanium, Chris King makes replacement baseplates for all standard sizes and a number of ingenious solutions for those that need something a little special to make their headset work. - Engineered and manufactured in Portland, Oregon USA - Devolution baseplates are a stainless steel solution that allow Chris King headsets to adapt to a wide variety of steerer tube sizes
Chromag Contact Pedals
$125.00
Chromag worked with Brandon Semenuk to design a pedal that features a lightweight, compact platform body that extends inboard bringing the riders feet closer to the cranks for superior control. The Contact pedal has a very low-profile, concave CNC’d surface that is only 13mm at pedal center and weighs in at only 190g per pedal.
Cinelli Cork Handlebar Tape (Solid)
$19.99
•High content, natural cork in a polyurethane base with a backside/center adhesive strip for easy mounting •Cinelli logo embossed throughout tape length •Includes logo plugs and finishing strips and enough tape for a full drop bar •Black and white lengths are 193cm and all other colors are 180cm
Crank Brothers Shoe Shields
$9.99
Protect the soles of your shoes with the Shoe Shields from Crank Brothers. These stainless-steel plates install under your cleats and prevent the pedal from digging in to your carbon-soled shoes.
Crank Brothers Premium MTB Cleats
$26.99
Crank Brothers' Premium MTB Cleats are perfect for your Crank Brothers Eggbeater, Candy, Acid, Smarty, Mallet, and Quattro pedals. They're made from solid brass for crisp entry and exit, and top-notch durability.
Dimension Quill-To-Threadless Steerer Adapter
$26.39
Dimension Stem Column Adaptors - Total quill length 180mm - Measurement from minimum insertion to top of steerer adaptor is 118mm - Alloy - Quill insertion diameter: 1-inch
Dimension 31.8mm Threadless Stem
$29.99 - $32.00
Dimension 31.8 Stems are fully forged 6061-T6 aluminum stems that have a 4-bolt handlebar clamp. - 31.8mm can be used with 26.0 bars with additional shim (SM5317) - Dimension stems are not intended for use with carbon handlebars or carbon steer tubes - Weight: 130g-180g
Dimension Steerer Extender
$35.99 - $43.99
Dimension Steerer Extender adds 2 to 3-1/4" height to steerer. - Extender clamps to steerer; stem clamps to extender - Adds 2 to 3-1/4-inch height to threadless steerer - Includes top cap and long bolt - 40mm of threadless steerer is required for proper installation - Do not stack steerer extenders; no more than one steerer extender recommended per bike - WARNING: Dimension Steerer Extender is not recommended for use on forks with carbon fiber steerers
DMR V-8 Pedals
$35.90 - $39.95
- Aluminum body, steel axle with precision ground adjustable bearings - Features grease ports, injection syringe included - 4 replaceable traction pins per side - 528g
Easton EA50 Seatpost
$39.99
Easton's EA50 Seatpost is rugged, reliable and perfect for all your cycling adventures. It's made from 2014-aluminum with Easton's TaperWall technology that controls the post's internal thickness, adding material where you need it and none where you don't. It provides excellent strength and durability while keeping the weight low. Plus, the EA50 boasts an easy-to-use 2-bolt clamp for secure seat adjustments.
Easton EA50 Stem
$39.99
With its classic blend of high strength and low weight, Easton's EA50 stem is a smart choice for your favorite ride. It's made of 3D forged aluminum for amazing stiffness and strength. Easton's Top-Lock technology locks the stem and faceplate together, creating a highly rigid interface while minimizing the loads on the bolts, making the EA50 perfectly safe for carbon bars.
Easton Bottom Bracket
$49.99
Tech specs: - BSA: 91g - PF30: 117g - BB86: 66g - BB386: 103g
Easton EC90 SL Crank Arms
$399.99
The EC90 SL crank arms utilize the RaceFace CINCH technology which allows for direct mount 1x rings as well as direct mount 2x spiders, providing industry-leading versatility and peloton-leading performance. - Hollow carbon construction paired with highest grade aluminum pedal insert and spindle - Bottom Bracket sold separately - CINCH removable spiders and direct mount rings utilize a 20-tooth ISIS BB tool for removal and installation - CINCH interface with road specific 30mm spindle - Road standard Q-Factor of 149mm; will fit every major road BB standard - Weight: 352g
ENVE Sweep Bar
$160.00
When you want to get your front end low, give ENVE and their Sweep Bar a go. Crafted from carbon for minimal weight and maximum stiffness, this flat bar measures in at 740mm wide for enhanced climbing leverage and cornering control. And, it's an ENVE, so you can set it, shred it and forget it.
ENVE Mountain Stem
$265.00
ENVE's Mountain Bike Stem is beautifully crafted from tough, lightweight carbon with an aluminum faceplate. Opposing bolts for the steerer tube spread out clamping forces as does the 4-bolt faceplate for a stiff, precise, secure front end. And, the classy matte finish looks great on every bike. - Handlebar-clamp diameter: 31.8mm - Steerer-clamp diameter: 1 1/8-inch - Rise: +/- 6 degrees - Weight: 99 grams (70mm)
Ergon GE1
$34.95
The two time overall winner of the Enduro World Series! The GE1 is the first ergonomic grip to be optimized for use on wide handlebars. The grip actively supports the correct position of the upper body, forearms, and hands during aggressive downhill riding. By rotating the grip 8% on the handlebar axis, the rider automatically bends the elbow outwards for technical riding. "Et Voilà!" as Frenchman and three time DH World Champion, Fabien Barel, would say, who helped develop the GE1 with Ergon. An inboard forged aluminum clamp keeps the GE1 secure. The fully integrated handlebar plugs connect to the inner core, enabling the rider to grip right at the end on the handlebar on a soft and damping grip edge. The unique GE1 shape reduces pressure on the sensitive ulna nerve and arm pump is effectively reduced. - Carbon bar compatible - Uses: mountain bike, freeride, dirt - Clamp: cold forged aluminium / CNC machined
Ergon GE1 Grips
$34.95
- Enduro series with dual-compound surfaces, softest in the palm rest - Inboard aluminum clamp with cutouts in grip core for added comfort - Updated rubber compound for greater shock absorption and steering control - Choose either standard or slim diameter
Page 1 of 9 Next page