Skip to main content

Bosch-Powered Copperhead models from BULLSBIKES of Germany are 20% OFF!

 Please send emails to: info@lagunabeachcyclery.com

Filter By:

Forks

Specialized Carbon Steerer Tube Plug
$10.00
Keep the weight down and your headset snug with the Specialzied Carbon Steerer Tube Plug.
Marzocchi Bomber Z1 Coil Suspension Fork
$749.00
Riders have been asking for it, and Marzocchi heard the call and has proudly delivered. The new Z1 Coil builds on the legacy of the single-crown fork that started the revolution way back in the '90s – the O.G. Bomber Z1 Coil. Starting with the stout and proven 36mm chassis of the modern day Bomber Z1, the new Z1 Coil retains the renowned Grip damper but swaps out the air spring assembly for the most advanced coil spring system Marzocchi has ever made. At the heart of this new coil system is an ultra-lightweight tempered silicon-chromium steel spring (available in 4 spring rates to suit a wide range of riders) coupled with a noise management system for near silent performance, an integrated air assist for progressivity and bottom-out control, and an external preload adjuster to dial in sag and firmness off the top. Travel can easily be changed in 10mm increments from 150-180mm (depending on wheel size) via included reconfigurable internal spacers. - Ultra-lightweight tempered silicon-chromium steel spring (Medium Spring included) - Noise management system for near silent performance - Integrated air assist for progressivity and bottom-out control - External preload adjuster to dial-in sag and firmness off the top - Travel can easily be changed in 10mm increments from 150-180mm (depending on wheel size) via included reconfigurable internal spacers - Additional springs sold separately to fine-tune and adjust for rider preference - Rake: 44mm
FOX 36 E-Optimized Factory w/Grip 2
$1,139.00
36 E-Optimized Factory forks are made specifically for the rigors of E-Bikes with a stouter chassis and longer durability due to adding material to strengthen critical areas. The design also uses tuning originally done for Enduro use, which fits the needs of the E-MTB and overall E-Bike uses. - Genuine Kashima Coating on upper tubes - FIT GRIP2 Damper and FLOAT air spring - E-Bike Chassis - Lower Leg Bleeders and Bypass Channels - Floating axles for perfect alignment
FOX 38 Factory Series GRIP2 29-inch
$1,199.00
The hard hitting, long-travel enduro specialist. When you need to go really big, reach for the 38. Optimized for 160-180mm of travel and packing the same revolutionary feature set as the 36, the 38 redefines what you think a long-travel single-crown fork is capable of, and sets a new benchmark for confidence, performance, and durability. Welcome to the big time. "Factory" says it all—feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Built on 38mm, ultra-durable Kashima-coated stanchion tubes, it features a floating axle, new arch design, and lower leg bleeders to release built-up pressure. - Genuine Kashima Coating on upper tubes - GRIP2 damper with Variable Valve Control - Next generation FLOAT EVOL with larger negative air chamber increases small bump sensitivity - Floating axle design - Lower leg bleeders - Direct mud guard mount - 29-inch: 723mm peak tire diameter
ENVE Composites Cross Disc Fork
$542.00
The ultimate carbon fiber disc brake compatible cyclocross fork. ENVE created this fork because we love cyclocross racing and gravel road adventures. Like all ENVE products, this fork was developed from a desire to improve the ride experience. In this case they knew that a thru-axle would make for a better tracking and braking front end. A quiet ride is also a priority, so the addition of a thru-axle means less rotor rub and caliper adjustments. Because the majority of time isn’t spent racing under UCI rule, they made this fork compatible with high volume tires — you can run up to a 45mm (1.9-inch) tire with a 700c wheel and up to a 50mm (2.0-inch) tire if you are running 650B. Using our proprietary molding methods, the thru axle disc cyclocross fork offers the ultimate in cyclocross and gravel road bike performance. From steerer tube to dropout the forks are constructed in one piece, which equates to a very efficient structure that yields a lightweight and highly durable product. The front thru-axle diameter is optimized for road and cyclocross disc applications at 12mm. Whether you are racing on the World Cup cyclocross circuit or riding gravel events like the Crusher or Dirty Kanza, the ENVE thru-axle cyclocross disc fork is designed to perform in these environments. - 1-1/8 – 1.5-inch tapered steerer
Page 1 of 1